Abstract This paper discusses the development and integration of a stereo vision system with an industrial robotic arm for welding operations. In order for the effects of lighting and background noise to be overcome, laser diodes are used to...
ABSTRACT: p-Xylene is an important industrial compound, and its demand has been increasing in recent years. It is mostlyproduced from cracking of naphtha, but there is a need for new and cost-effective methods for the production. Toluene al...
Methylation of benzene is an alternative low-cost route to produce xylenes, but selectivity to xylene remains lowover conventional zeolitic catalysts. In this work, a combined dry-gel-conversion and steam-assisted-crystallization method is u...
Drilling operations are perhaps the most popular ma-chining process being undertaken today, with their origins being traced back to cutting tool develop-ments in North America in the 19th century. In 1864 toward the latter part of the Americ...
8.1 Designs and Mechanical Propertiesof Crankshaft Assemblies8.1.1 Function and Requirements of CrankshaftAssembliesTogether with both the piston pins and the crankshaftscrank pins, the connecting rod in reciprocating pistonengines converts...
1. Introduction, definition of problem Development of technology of cooling moulds via thermoelectrical (TEM) means derives out of the industrial praxis and problems, i.e. at design, tool making and exploitation of tools.Current cooling tech...
A rapid mould-making system: material properties and design considerations Introduction The engineering reasons for building a proto-type mould are several and include evaluation of the processsability of candidate materials in the mould and...
In order to characterize the transient dynamics of steam turbines subsections, in this paper,nonlinear mathematical models are first developed based on the energy balance, thermo-dynamic principles and semi-empirical equations. Then, the re...
1 Introduction The conceptual design of fixtures is one of the most complex intellectual tasks in the process of industrial design [1]. This early stage of design can be automated with the application of expert systems.35323 An expert system...
SUMMARYThe objective of this study is to detect faults due to multiple element failures in HVAC systems occurringconcurrently. To classify and detect single as well as multiple faults, measurements were made of supply airtemperature, OA-damp...
