摘要一个转动不均匀的速度通过主齿轮和曲轴滑块机构和旋转曲轴匀速通过主齿轮固定在曲柄机构轴被构造成这样，各主齿轮和各驱动轴的中心之间的距离是相同的。在驱动轴上的驱动...

Vertical brand extensions: current research and managerial implications Abstract: Relates evidence which suggests that launching a vertical brand extension generally has a negative impact on the core brand because it dilutes the core brand...

摘要现代船用发动机,功率输出和缸内燃烧压力不断增加，从而导致更高的摩擦在发动机的组成部分，特别是在活塞组件.一个有良好的接收能力的摩擦的各种发动机部件的贡献是必需的...

Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof, Having regard to the proposal from the Commission, Having regard to the opinion of the European Parliament (1).43917 Having reg...

unbalancing are discussed. 1 Introduction Machining with high speeds (HSM) is one of the modern technologies, which in comparison with conventional cutting enables to increase efficiency, accuracy and quality of workpieces and at the some ti...

Vibration characteristics of a rotor-bearing system with pedestal looseness areinvestigated. A non-linearmathematical model containing sti!ness and damping forces withtri-linear forms is considered. The shooting method is used to obtain the...

Finite deformation mechanics in buckled thin filmson compliant supportsHanqing Jiang*, Dahl-Young Khang, Jizhou Song, Yugang Sun, Yonggang Huang , and John A. Rogers***Department of Mechanical and Aerospace Engineering, Arizona State Univer...

ABSTRACT Reconfigurable manufacturing systems were developed as a proposed solution to the varying market and customer requirements present in todays global market. The systems are designed to offer adaptability in machining functions and p...

AbstractThe comprehensive approach to the digital factory has become a subject of paramount importance to all major automotivecompanies, and the chances offered by it are numerous. However, extensive preliminary work is still necessary and t...

Abstract Cone crushers are used in the aggregates and mining industries to crush rock material. A model to predict the worn geometry of cone crushers was previously developed. In that model there was some disagreements between predicted and...