Abstract: In large marine two stroke Diesel engines during combustion of sulfur containing fuel, the sulfur is oxidised to SO2, mainly, although substantial amounts of SO3 and H2SO4 will form as well. These latter species may cause corrosio...
abstractThe construction of sheet pile walls may involve either excavation of soils in front or backfilling of soilsbehind the wall. These construction procedures generate different loading conditions in the soil andtherefore different wall...
abstractThe influence of nonlinearity on the dynamic response of cast-in-situ reinforced concrete piles subjectedto strong vertical excitation was studied. Forced vibration test of single piles (L/d=10, 15, 20) and 2 2pile groups (s/d=2, 3,...
abstractA series of plane-strain model tests was performed to investigate the behavior of cantilever soil retainingwalls (CWs) and geosynthetic-reinforced soil retaining walls with a rigid facing (GRS-RWs) placed onnon-deformable and deforma...
Influence of Relative Density of Soil on Performance of Geocell-Reinforced Sand Foundations Sujit Kumar Dash1Abstract: The paper brings out the influence of relative density of foundation soil on performance improvement of geocell reinforce...
AbstractA numerical method that takes into account the coupling between the rigidities of the piles, the cap, and the column has been devel-oped for analyzing the response of pile group supported columns. Special attention is given to consid...
The System Analysis of Separating Technology of Traction Mechanism and Storage Mechanism of Deep Sea Investigating Winch Abstract Deep-sea survey winch is a special equipment of deep-sea survey instrument for launch and recovery , it plays...
Abstract Broaching is a very common manufacturing process for the machining of internal or external complex shapes into parts. Due to the process geometry, broaching tool is the most critical parameter of the broaching process. Therefore, op...
齿轮和轴的介绍摘要：在传统机械和现代机械中齿轮和轴的重要地位是不可动摇的。齿轮和轴主要安装在主轴箱来传递力的方向。通过加工制造它们可以分为许多的型号，分别用于许多...
Basis of mechanical designing 1、 Lathes Lathes are machine tools designed primarily to do turning, facing and boring, Very little turning is done on other types of machine tools, and none can do it with equal facility. Because lathes also...
